Humidity Sensor - GE SCA1000 Technical Service Manual

Screws Screws
4. Remove 2 screws and the thermistor.

Humidity Sensor

1. Remove the outer case (see procedure).
2. Disconnect the humidity sensor wiring from
the PCB.
Screws Screws
3. Remove 7 screws securing the damper duct
to the unit and lift to provide access to the
humidity sensor.
Thermistor Thermistor
GEA00988
GEA01006
Cavity TCO Cavity TCO Cavity TCO
Screw Screw Screw
4. Remove 2 screws and the humidity sensor.
– 38 –
Humidity Sensor Humidity Sensor Humidity Sensor
Screws Screws Screws
GEA01007