Cavity Tco; Turntable Motor; Lower Heater - GE SCA1000 Technical Service Manual

Cavity TCO

1. Remove the grille (see procedure).
2. Remove the cover panel.
Screw Screw
Screws Screws
Cover Panel Cover Panel
Disconnect the wire leads from the TCO.
Humidity Sensor Humidity Sensor Humidity Sensor
Cavity TCO Cavity TCO
Screw Screw
3. Remove 1 screw and the TCO.

Turntable Motor

1. Remove the turntable shaft from the inside of
the oven by lifting it out of the oven bottom.
Screws Screws Screws
Convection Convection
Fan Cover Fan Cover
GEA01003
Screws Screws
GEA01007
GEA00986
2. Remove 8 screws, lower the bottom plate,
disconnect the cooktop light wire leads, and
remove the bottom.
Turntable Turntable
Motor Motor Motor
3. Disconnect the turntable motor harness
connector.
4. Remove 2 screws and the turntable motor.

Lower Heater

1. Remove 8 screws, lower the bottom plate,
disconnect the cooktop light wire leads, and
remove the bottom (see photo in step 2 of
previous procedure).
Lower Heater Lower Heater Lower Heater
Assembly Assembly Assembly
2. Remove 4 screws and lower the heater
assembly.
3. Disconnect the wire leads and remove the
heater assembly.
– 33 –
Screws Screws Screws
Harness Harness
Connector Connector
GEA01012
Wire Wire Wire
Leads Leads Leads
Screws Screws Screws
GEA01013