High Voltage Transformer; Magnetron; Damper Assembly - GE SCA1000 Technical Service Manual

High Voltage Transformer

1. Remove the control panel (see procedure).
2. Remove the low voltage transformers (see
procedure).
3. Disconnect the high voltage transformer
wiring.
Screws Screws
4. Remove the right cooktop filter.
5. Access and remove 4 screws securing the
high voltage transformer.
6. Remove the transformer.

Magnetron

1. Remove the control panel (see procedure).
2. Remove the low voltage transformers (see
procedure).
3. Remove the high voltage transformer (see
procedure).
4. Disconnect the wiring from the magnetron and
the magnetron TCO.
High Voltage High Voltage
Transformer Transformer Transformer
GEA01015
GEA00987
– 31 –
Magnetron Magnetron
TCO TCO Screws Screws
5. Remove 4 screws and the magnetron.

Damper Assembly

1. Remove the control panel (see procedure).
2. Disconnect the damper motor wire leads.
3. Remove 3 screws and lift the damper motor
assembly straight up to disengage the damper
door and remove.
Note: Be certain linkage to damper outlet door is
connected when reassembling.
Damper Outlet Damper Outlet Damper Outlet
Door Linkage Door Linka Door Linkage
Damper Door Damper Door Damper Door
Sensing Switc Sensing Switch Sensing Switch
Note: Photo shows casing removed for
clarity.
Magnetron Magnetron
Screws Screws
GEA00997
Mounting Mounting Mounting
Screws (3) Screws (3) ws (3)
GEA01130