Invacare TDX SC Parts Catalog page 86

Conventional Back without Mounting Hardware
Only the Back Assembly needs to be replaced when changing back heights.
NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is
requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.
Item
Number Note
Part Number
1 A 1125564
2 A 1124578
3 B 1097397
4 C 1125723
5 1125724
NOTE: A - Description reflects materials actual width x height. Item is used for a 16" wide chair with an overall back height of 20"
B - Back cover and foam are sold as a back cushion assembly only. Description reflects actual back cushion material width x
Height. Back Cushion will be 1" wider than the chair width and used for a chairs overall back height of 20".
C - Hook Fastener w/ Adhesive Back Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new
Back Pan or Back Assembly is requested.
Form No. 07-082
(16" Wide) Non-Manual Tilt - TDX SPREE
Description
Back Assembly w/o Hardware (16" W x 20" H)
Pan, Back (16" W x 15" H)
Back Cushion Assembly (17" W x 15" H)
Kit, Hook Fastener w/ Adhesive Back
Trim, Edge, Cut-To-Length, Vinyl Black (96" L)
To order call toll free 1-800-333-6900, or www.invacare.com
85
Quantity Per
Package Assembly
1 1
1 1
1 1
1 1
1 1