Installation Diagram Of Indoor And Outdoor Units - Toshiba RAS-24NKHD-E5 Service Manual

Split wall type
Table of Contents

Advertisement

8-2. Installation Diagram of Indoor and Outdoor Units

5 Sasa-Zeolite plus filter
Before installing the
wireless remote control
• With the remote control cover
open, load the batteries supplied
correctly, observing their
polarity.
2
Wireless remote control
Cover
3
Batteries
6 Plasma air purifier
2 Wireless remote control
1 Installation
Hook
plate
Hook
Shield
pipe
Vinyl tape
Appl y after carr ying
out a draina ge test.
Extension drain hose
(Not available,
provided by installer)
− 31 −
FILE NO. SVM-06010
For the rear left and left piping
Insert the cushion between
the indoor unit and wall, and
tilt the indoor unit for better
operation.
Do not allow the drain hose to
get slack.
Make sure to run the drain
hose sloped downward.
The auxiliary piping can be
connected to the left, rear left,
rear, right or bottom.
Right
Rear
Bottom
Insulate the refrigerant pipes
separately with insulation, not
together.
6 mm thick heat resisting
polyethylene foam
Saddle
Wall
Cut the piping
hole sloped
slightly .
Left
Rear left

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents