Attach the Leg Actuator to the Mast Assembly
NOTE: For this procedure, refer to FIGURE 2.2.
1.
Position the leg actuator between the mast bracket.
2.
Move the legs to align the holes in the leg actuator with the holes in the mast bracket.
3.
Install the pin through the holes of the leg actuator and mast bracket and secure with hitch pin.
Hitch Pin
(not shown)
Mast Bracket
Pin
Part No. 1145811
Hand Control
Mast
Control
Box
Leg
Actuator
FIGURE 2.2 Attach the Leg Actuator to the Mast Assembly
11
SECTION 2—ASSEMBLY
Lift Arm
Stand Up Patient Lift