Table of Contents
Advertisement
4.
Perform the following to secure the leg actuator to the mast bracket (Detail "B"):
A. Position the leg actuator between the mast bracket.
B. Move the legs to align the holes in the leg actuator with the holes in the mast bracket.
C. Install the pin through the holes of the leg actuator and mast bracket and secure with hitch pin.
5.
Plug the hand control into the bottom of the control box.
Hitch Pin
(not shown)
Mast Bracket
Pin
Part No. 1145811
Leg
Hand Control
Mast
Battery and
Control Box
Leg Actuator
Slot in Base
FIGURE 7.4 Replacing the Leg Actuator
Base
Hitch Pin
25
SECTION 7—MAINTENANCE
Lift Arm
Mast Actuator
Stand Up Patient Lift
Pivot
Bracket
Leg Actuator
Pin
Advertisement
Table of Contents
