Section 7-Arms; Adjusting Armrest Height - Invacare Nutron R50LX Owner's Operator And Maintenance Manual

SECTION 7—ARMS
SECTION 7—ARMS
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.

Adjusting Armrest Height

NOTE: For this procedure, refer to FIGURE 7.1.
Make sure the height adjustment lever is in the locked position before using the
wheelchair.
1. Unlock the armrest by flipping the height adjustment lever on the top front of the
armrest to the up (horizontal) position.
2. Adjust armrest to one (1) of five (5) positions.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest into the
arm assembly.
3. Lock the armrest by pressing the height adjustment lever into the down (vertical)
position when the desired armrest height is achieved.
4. Repeat STEPS 1‐3 for other armrest.
Locked (Vertical)
Unlocked (Horizontal)
Nutron® Series
WARNING
WARNING
Armrest
FIGURE 7.1 Adjusting Armrest Height
37
Height Adjustment
Lever
Part No.1106645