Table of Contents
Advertisement
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
SECTION 4—SAFETY
INSPECTION/TROUBLESHOOTING
NOTE: Every six (6) months or as necessary take your wheelchair to a qualified technician for a
thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance
the smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be
cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your
wheelchair.
Safety Inspection Checklists
Initial adjustments should be made to suit your personal body structure needs and
preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure arm pivot points are free of wear and looseness.
❑ Inspect seat and back upholstery for rips or sagging.
❑ Ensure armrest pads sit flush against arm tubes.
❑ Ensure seat release latch is functional. Replace if necessary.
❑ Ensure wheel mounting bolts are secure on drive wheels.
❑ Ensure no excessive side movement or binding when drive wheels are lifted and spun
when disengaged (freewheeling).
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect tires for flat spots and wear.
❑ Clean upholstery and armrests.
Inspect/Adjust Weekly
❑ Inspect tires for flat spots and wear.
Nutron® Series
CAUTION
23
Part No.1106645
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
