Adjusting Anti-Tippers - Invacare Orbit 1073955 Owners Operating & Maintenance Manual

Adjusting Anti-Tippers

NOTE: For this procedure, refer to FIGURE 10.6.
NOTE: The anti‐tippers must maintain a 1‐1/2 to 2‐inch clearance between the bottom of the
anti‐tipper wheels and the floor.
1. Depress the release button on the wheeled portion of the anti‐tipper and slide it
up/down to achieve the 1‐1/2 to 2‐inch clearance.
Anti-tippers MUST be fully engaged and release buttons fully protruding out of
adjustment holes.
2. Check to make sure that the release buttons are fully engaged in adjustment holes and
1‐1/2 to 2‐inch clearance is maintained.
Part No. 1073955
WARNING
Wheelchair Frame
Choose one of three
positions to maintain
1-1/2 to 2-inch
clearance
FIGURE 10.6 Adjusting Anti-Tippers
SECTION 10—ANTI-TIPPERS/WHEEL LOCKS
Anti-Tipper
Release
Button
69 ™
Orbit