Unlocking Brakes; Adjusting Height - Invacare 65410 Manual

Table of Contents

Advertisement

Available languages

Available languages

USING THE HAND BRAKE
NOTE: For the following procedure, refer to FIGURE 1 on pages 8 and 9.
1. Pull up on the top portion of the brake handles towards the push handles.
2. Perform one of the following:
Remain Stationary - Hold the brake handle up.
Continue Mobility - Release the brake.
LOCKING BRAKES
MODELS 65350G, 65410, 65450, 65650, 65650R,
65750, 65850, AND 65850B
Push down on the bottom portion of the brake handle.
MODEL 65750
Push down on both push handles.

UNLOCKING BRAKES

MODELS 65350G, 65410, 65450, 65650, 65650R,
65750, 65850, AND 65850B
1. Pull up on the top portion of the brake handle.
2. Release the brake handle.
MODELS 65750
Lift up on both push handles.

ADJUSTING HEIGHT

NOTE: For the this procedure, refer to FIGURE 1 on pages 8 and 9.
MODELS 65350G, 65410, 65650, 65650R, 65750,
65850, AND 65850B
1. Loosen and remove the adjustment knob by turning counterclockwise.
2. Position the push handle so that when the user's arm is down to their
side, the handgrip is at wrist height.
3. Install the adjustment knob into one of the six adjustment holes.
4. Secure the adjustment knob by turning clockwise.
5. Securely tighten.
6. Repeat STEPS 1-5 for the other side.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

65350g654506565065650r6575065850 ... Show all

Table of Contents