2.2.12. Removal of the Operation PWB
1. Remove 2 screws (J) as shown in Fig. 2-2-17.
2. releasing 2 tabs, remove the Eject Knob.
3. Remove the Remote Control Holder Unit.
Fig. 2-2-17
4. Remove 4 screw (K) and the Support Plate as shown in Fig. 2-2-18.
5. Carefully pull out the Operation PWB
Fig. 2-2-18
Assembly Note:
When installing the Eject Knob, be careful of the direction of
the insertion as shown in Fig. 2-2-19.
Fig. 2-2-19
2.3. DISASSEBLY FLOWCHART OF
OPTICAL UNIT
This flowchart indicates the disassembly steps of the main parts
of Optical Unit. When reassembling, perform the step(s) in the
reverse order.
Fig. 2-3-1
LX-P1010ZU/ZE
(PA014) 10