Cts/Rts Emulation; Ack/Nak Mode; Honeywell Bioptic Aux Port Configuration - Honeywell Hyperion 1300g User Manual

CTS/RTS Emulation

CTS/RTS Emulation On

ACK/NAK Mode

ACK/NAK Mode On

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit. Character
RTS/CTS with timeout and 232 ACK/NAK are also enabled.
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults
programming code above.
2 - 6
Honeywell Bioptic Settings
bar code on page 1-5 first, then scan the
* CTS/RTS Emulation Off
* ACK/NAK Mode Off