Usb Pc Or Macintosh Keyboard; Usb Hid Pos; Usb Serial Commands; Usb Serial Emulation - Honeywell Hyperion 1300g User Manual

USB PC or Macintosh Keyboard

Scan one of the following codes to program the scanner for USB PC Keyboard
or USB Macintosh Keyboard. Scanning these codes also adds a CR and LF.
USB Keyboard (Mac)

USB HID POS

Scan the following code to program the scanner for USB HID POS bar code
scanners.
USB HID POS Bar Code
Scanner

USB Serial Commands

USB Serial Emulation

Scan the following code to program the scanner to emulate a regular RS232-
based COM Port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Honeywell website (www.honeywellaidc.com). The
driver will use the next available COM Port number. Apple® Macintosh comput-
ers recognize the scanner as a USB CDC class device and automatically uses a
class driver.
Scanning this code also adds a CR and LF.
USB Serial Emulation
Note: No extra configuration (e.g., baud rate) is necessary.
2 - 5