Code 39; Code 39 Start/Stop Characters; Code 39 Check Character - Honeywell Hyperion 1300g User Manual

Code 39

< Default All Code 39 Settings >
Code 39
*On
Off

Code 39 Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don't
Transmit.
Transmit
* Don't Transmit

Code 39 Check Character

No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only
reads Code 39 bar codes printed with a check character, but will not transmit
the check character with the scanned data.
6 - 7