Mitsubishi Electric WD390U-EST User Manual page 49

Advanced display utilities (continued)
PC Less Presentation
You can project JPEG images and the PtG contents
stored in the USB device such as a USB flash drive
without using a computer.
Also, you can perform effective presentation of
them using the AutoRun function and the slideshow
function.
To create PtG contents, you need to install the
software "PtG Converter-Lite" contained in the
attached CD-ROM.
Important:
supported.
storage device with power consumption less than
5V/500mA.
file thumbnail (obtained from EXIF) is supported.
PtG file preview limitation:
PC Less Presentation does not support the
following image:
pixels MCU
YUV4:2:0/4:2:2 and 32 pixels for YUV4:4:4
Installation of PtG Converter-Lite
About PtG Converter-Lite
PtG Converter-Lite is a software which converts PPT
files created by Microsoft Office PowerPoint into PtG
files that can be projected by PC Less Presentation.
Pause/page marks and animations contained in the
PPT files are also converted.
Features
800*16bpp PtG
System requirement
Intel ® Pentium ® M processor 1.5 GHz or above
256 MB or more (recommended)
Windows XP, Windows Vista and Windows 7
Microsoft Office 2003, Microsoft Office 2007 and
Microsoft Office 2010
Installing PtG Converter-Lite
Before starting installation, be sure to read "ReadMe.
txt" contained in the CD-ROM. Copy "PtG Converter-
Lite_v200.exe" contained in the TOOLS folder of CD-
ROM to the hard disk of your computer.
1. Double-click "PtG Converter-Lite_v200.exe", and
start up the installer of the PtG Converter-Lite.
2. Follow the on-screen instructions to install the
software.
When deleting PtG Converter-Lite (Uninstallation)
Important:
be ended in advance. If the application continues
operating, uninstallation cannot be performed
normally.
1. Select [Start]-[All Programs]-[PtG Converter]-
[Uninstall].
2. Follow the on-screen instructions to uninstall the
software.
Conversion of a PPT file to PtG file using
the PtG Converter-Lite
1. Click the PtG Converter-Lite icon " " to execute
the program.
Menu bar
Right-click to open the menu.
Output Resolution
Selects the resolution of the PtG file after the
conversion.
Max Circle Animation:
Selects the max time of animation.
About:
Displays the software version information.
Exit:
Exits the PtG Converter-Lite.
PPT conversion button:
Starts the conversion from the PPT file to the
PtG file.
2. Click the PPT conversion button.
The file selection screen appears.
EN-49
Menu bar PPT conversion button