Mitsubishi Electric WD390U-EST User Manual page 39

Advanced display utilities (continued)
7. Click [Add...].
8. Enter the user account name configured in the
"1. Creating a user account" (see page 38) in the
textbox and click [OK].
displayed.
9. Click [OK].
10. Click [OK].
 In Windows XP
1. Select [Start]-[Control Panel].
2. Click [Performance and Maintenance].
System icon and go to step 4.
3. Click [System].
4. Click the [Remote] tab and check the [Allow users
to connect remotely to this computer] checkbox.
5. Click [Select Remote Users...].
displayed.
6. Perform steps 7-10 in the section " In Windows
Vista, Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server."
3. Configuration of Windows Firewall
Configure Windows Firewall as follows.
 In Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server
1. Select [Start]-[Control Panel].
2. Select [System and Security].
3. Select [Allow a program through Windows Firewall].
4. Check the [Remote Desktop] checkbox and the
[Home/Work (Private)] and [Public] checkboxes on
the same line, and click [OK].
 In Windows Vista
1. Select [Start]-[Control Panel].
2. Select [Allow a program through Windows Firewall].
Windows Firewall icon and select [Allow a
program through Windows Firewall] on the
upper left of the window.
displayed.
EN-39