Mitsubishi Electric WD390U-EST User Manual page 13

Basic connections (continued)
Projector + Computer
For computer with Mini D-SUB
COMPUTER/
COMPONENT
VIDEO IN
AUDIO AUDIO IN-3L S-VIDEO
IN-1
AUDIO OUT
AUDIO
IN-2
AUDIO IN-3R
MONITOR OUT
VIDEO
AUDIO AUDIO IN-1
OUT or IN-2
For analog connection:
1. Connect one end of the supplied computer cable to the COMPUTER/COMPONENT VIDEO IN terminal (1, 2) of the
projector.
2. Connect the other end of the computer cable to the monitor port of the computer.
For monitor connection:
Connect the computer cable from the monitor to the MONITOR OUT terminal of the projector.
the monitor.
signals during standby mode.
Important:
projector. Contact your dealer for further information.
connected computer and prepare a proper cable for connection. Some computers don't have the audio output
terminal.
For Mac computers
information.
your dealer for further information.
About DDC
The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC 1/2B standard. When a
computer supporting this standard is connected to this terminal, the computer will automatically load the information
from this projector and prepare for output of appropriate images.
wall outlet first, and then boot up the computer.
COMPUTER / COMPONENT VIDEO
SERIAL
USB-A LAN
USB-B
IN-1
IN-2
Audio cable (option)
PC audio cable (option)
Computer cable
Necessary when outputting to both
a PC monitor and the projector.
Computer cable (option)
MONITOR OUT
EN-13
Computer
To PC audio output
To monitor port