Advanced Display Utilities - Mitsubishi Electric WD390U-EST User Manual

Advanced display utilities

Thin client
Projecting the desktop screen of a remote computer
connected via a network onto the projector, you can
remotely control the remote computer through the
projector.
To use the thin client function, you need to install the
software "ThinClient.exe" contained in the attached
CD-ROM.
Supported OS's are as follows:
Premium)
Important:
Windows 7 do not permit simultaneous operation
by multiple users.
2008 R2 or Windows MultiPoint Server, a Client
Access License (CAL) is required. For details, see
"Client Access License (CAL)" on page 42.
projector.
Preparation for using Remote Desktop
The thin client function utilizes the standard Microsoft
Remote Desktop function. To use the Remote Desktop
function, perform the following preparations on the
computer.
Important:
computer using the administrator account.
1. Creating a user account
Important:
account Do not use double-byte characters for the
user account name and password.
2. Configuring Remote Desktop users
Configure the Remote Desktop users as follows.
 In Windows Vista, Windows 7, Windows Server
2008 R2 or Windows MultiPoint Server
1. Select [Start]-[Control Panel].
2. In Windows Vista, select [System and
Maintenance]. Otherwise, select [System and
Security].
double-click the System icon and go to step 4.
3. Select [System].
4. Click [Remote settings].
5. Select [Allow connections from computers running
any version of Remote Desktop (less secure)].
6. Click [Select Users...].
displayed.
EN-38