Invacare 6264P Assembly, Installation And Operating Instructions page 6

Tightening Swivel Casters
NOTE: Refer to Installation Warning on page 2.
1. Remove swivel wheel attachments from front legs by depressing snap button.
2. Hold one swivel wheel attachment with the wheel up as shown in figure 4.
3. Turn hex nut clockwise with a wrench to tighten swivel caster.
4. Repeat STEPS 2‐3 for remaining swivel wheel attachment.
5. Press the snap buttons and slide the swivel wheel attachments onto the front legs of
the walker. Ensure that the snap button of each leg fully protrudes through the desired
adjustment hole and legs are adjusted so the walker sits level.
\
FIGURE 4 Replacing Fixed Wheels/Swivel Casters
Leg Extensions and
Wheeled Walker Accessories
Hex
Nut
Leg
Tube
6
Wheel
Swivel Caster
Housing
Adjustment
Holes
Snap-Button
Part No 1118382