Setting Up The Audio Options; Setting Up The Display Options - Samsung DVD-E217 User Manual

00228A/DVD-E217-2 9/2/03 5:16 PM

Setting Up the Audio Options

1
With the unit in Stop mode, press the MENU button.
2
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
3
Select Audio Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
4
Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
Be sure to select the correct Digital Output
NOTE
or no audio will be heard.
DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
38
Page 38
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the
Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital
Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.

Setting Up the Display Options

1
With the unit in Stop mode, press the MENU button.
2
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
3
Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4
Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
TV Aspect
Still Mode
Screen Messages
Front Display
Black Level
NTSC Disc Output
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
39