Electrical; Repair Or Service Information - Invacare BAR750 Owner's Operating And Maintenance Manual

Invacare bariatric bed mattress owner's operator and maintenance manual
Hide thumbs Also See for BAR750:
Table of Contents

Advertisement

SECTION 1—GENERAL GUIDELINES
DO NOT use the bed rails as push handles for moving the electric bed.
Replacement mattresses and bed rails with dimensions different from the original 
equipment supplied or specified by the bed frame manufacturer are not interchangeable. 
Variations in bed rail design, width and thickness or firmness of the mattress could 
cause/contribute to entrapment. 
Invacare products are specifically designed and manufactured for use in conjunction with 
Invacare accessories. Accessories designed by other manufactures have not been tested by 
Invacare and are not recommended for use with Invacare products.

Electrical

DANGER
When using an extension cord, use only a three wire extension cord having at least
16 AWG (American Wire Gauge) wire and the same or higher electrical rating as
the device being connected. Use of improper extension cord could result in a risk of
fire and electric shock. Three prong to two prong adapters should not be used. Use
of three prong adapters can result in improper grounding and present a shock haz-
ard to the user.
NEVER operate if the unit has a damaged cord or plug. If it is not working properly, call 
a qualified technician for examination and repair.
Keep all electrical cords away from heated or hot surfaces.
Ensure all cables and cords are routed such that they will not become entangled or 
pinched. Otherwise damage or injury may result.

Repair or Service Information

DO NOT open assemblies such as the motors, pendant, junction boxes or gear boxes. No 
user serviceable parts are inside. Only qualified technicians are permitted to repair these 
parts. If unqualified individuals perform any work on these beds, the warranty is void.
Unplug the power cord from its power source before performing any maintenance on the 
electric bed. DO NOT unplug the power cord from the junction box. Damage to cord will 
result.
Before installing the connector into the junction box, be sure the side with the locking tab 
is facing downward ‐ otherwise, injury or damage may occur.
13
Part No 1143215
BAR750

Advertisement

Table of Contents
loading

Table of Contents