Unlocking The Casters; Adjusting Bed Rail - Invacare BAR750 Owner's Operating And Maintenance Manual

3. Move the bed in a straight line about three feet backward or forward to lock.
NOTE: This action will keep the caster from swiveling and allow better forward and backward
movement. The bed can now be moved with greater stability.
4. Push the bed from the foot end.
Ensure that all four casters are locked and that the bed does not move before
transferring. DO NOT transfer occupant if bed is not stable.
NOTE: The locking function holds the bed motionless when the bed is parked.
Press HERE
to lock
Control
Panel

Unlocking the Casters

NOTE: To allow the bed to be rolled next to a stretcher, unlock all four casters.
1. Step down on the back of the control pedal on each caster.

Adjusting Bed Rail

Make sure side rails are securely locked into position. Otherwise, an injury or
accident may occur.
NOTE: For this procedure, refer to FIGURE 2.4 on page 18.
NOTE: Head end side rails are located on each side of the bed. Side rails have a three‐position
vertical adjustment.
1. To raise or lower bed rail, grab top section of rail with one hand while pulling the
release knob with the other hand.
2. Pull bed rail up or down as required.
3. Allow the release knob to spring back into locked position.
Part No 1143215
WARNING
Press HERE
to unlock
Control
Panel
DETAIL "A" -
UNLOCKED
FIGURE 2.3 Locking the Casters
WARNING
17
SECTION 2—OPERATION
DETAIL "B" -
LOCKED
BAR750