1.2 Controlling the digital receiver
You can control the digital receiver with the remote control
and the front panel buttons.
NOTE
1.2.1 The front panel
TV/STB
REMOTE
STANDBY
TV/STB lamp
REMOTE lamp
STANDBY lamp
Status display
STANDBY button
MENU button
1.2 Controlling the digital receiver 3
When the digital receiver is off but plugged to a wall
outlet, we say that it is in standby mode; on the other
hand, when it is on, it is in operation mode. You should
keep the digital receiver plugged to a wall outlet so as
it can run timer events.
lights up while your video recorder operates
instead of the digital receiver. For more descriptions,
refer to § 3.2.3.
lights up whenever you press a button of
the remote control.
lights up while the digital receiver is in standby
mode.
displays a current time in standby mode, and
displays a current status of the digital receiver in op-
eration mode.
toggles the digital receiver between oper-
ation mode and standby mode.
displays the menu, or escapes to a higher level
menu out of a submenu.
OK