Recording By Electronic Program Guide; Recording When Using Time Shift - Topfield TF 5200 PVRc User Manual

7.1.4 Recording by electronic program guide

1.
2.
3.
4.
5.

7.1.5 Recording when using time shift

While you are watching a program by time shift function, you
can record the program by performing the following steps:
1.
2.
3.
Select the service you want to record.
£
¢ ¡
Press the button to display its electronic program
GUIDE
guide.
Select a program you want to record. Pressed the
button one time, P is marked up on the program entry;
pressed once more, R is marked up. The former indi-
cates turn-on, the latter indicates record-on.
This timer recording is put on the timer list. To edit this
timer recording, press
appears, in which you can change its timer settings.
To remove the marking, press the
Press button to start time shift.
To find a desired recording position, press
button unceasingly until you find it.
Press button to start recording.
7.1 Recording a program 45
If an electronic program guide
is properly provided on the ser-
vice you wish to record, you can
set a timer recording in it by per-
forming the following steps:
button, then a timer edit box
£
¢ ¡
button once again.
OK
button or
£
¢ ¡
OK