Recording A Program; Immediate Recording By The Remote Control - Topfield TF 5200 PVRc User Manual

40 Recording and Playing Back

7.1 Recording a program

a service different from the service being recorded, you can
view a number on the center of the symbol, which indicates
the order that the recording is started. The outer circle of the
recording symbol indicates progress rate.
NOTE

7.1.1 Immediate recording by the remote control

To record a program you are watching at present, press
button.
To pause recording, press
button again.
A current recording will be stopped after the time set to the
Duration parameter. If the information about the next pro-
grams is provided through the electronic program guide, the
After this program and After next program options would be
available. Once the After this program option is selected, the
Once a recording is started, a recording symbol like
the next figure will be displayed on the right top of
the screen for a few seconds. When you are watching
When a recording is finished, it might not be saved if
its recording duration is less than 1 minute.
button. To resume it, press
After a recording is started,
pressing
ing control box like the next fig-
ure, in which you can specify
its duration on which it will be
ended.
displays a record-