Resetting To Factory Settings - Topfield TF 5200 PVRc User Manual

26 Service Search
Frequency parameter. Symbol Rate stands for data transfer
rate. QAM is a form of modulation. Broadcasting operators
send their services in a symbol rate by a modulation method.
Perhaps you do not have to specify the Symbol Rate and QAM
Mode parameters since they are seldom changed. However,
you should the QAM Mode option to Auto for more certainty.
You can specify the Start Frequency, End Frequency and Sym-
bol Rate parameters with the numeral buttons if you want to
change them.
If the digital receiver have failed to find every service you
want in a service search, you should set the Search Mode op-
tion to Network. With this option, the digital receiver will find
your desired services as getting the correct frequecy informa-
tion, but it takes longer time.
To search only one frequncy, set the Search Mode option to
Manual and specify your desired frequency at the Frequency
parameter with the numeral buttons. In this case, you should
set the Network Search option to On. Then the digital receiver
will search your desired frequency taking somewhat long time
in the same manner with the network search mode.
You can search pay services as well as free services. To search
only free services. set the FTA/Scrambled option to FTA only.
FTA means free service. To search only pay services, set it to
CAS only. CAS means pay service. To search both free services
and pay services, set it to FTA + CAS.
To start service search, select the Service Search command.
Then appears a list box, in which found services will be listed.
Press the
has been completed. To stop service search on the way or exit
without saving, press the

4.2 Resetting to factory settings

The digital receiver maintains the following data:
£
¢ ¡
button to save found services when service search
OK
£
¢ ¡
button.
EXIT