Planning The Installation; Preparation For Installation; Packing List - Lopi Cape Cod Owner's Manual

SAFETY NOTICE:
Please read this entire manual before you install and use your new room heater.
Failure to follow instructions may result in property damage, bodily injury, or even
death. Contact local building or fire officials about restrictions and installation
inspection requirements in your area.

Planning the Installation

We suggest that you have an authorized Travis Industries dealer install your stove. If you install the
stove yourself, your authorized dealer should review your installation plans.
Check with local building officials for any permits required for installation of this stove and notify your
insurance company before proceeding with installation.

Preparation for Installation

• Make sure the baffles and combustor are in place.
• Check for damage to the exterior of the stove (dents should be reported, scratches can be fixed by
applying touch-up paint).
• Check the interior of the firebox (replace any cracked firebricks and make sure the baffle and catalytic
combustor are in place).
The stove can be lightened by removing the firebricks and baffle (pg. 32) - replace before operation.

Packing List

• (9) Firebricks (see page 34 for installation instructions)
• (1) Fire poker (shipped on pallet)
• (1) Wood moisture meter
• (1) Pair of gloves
• (1) Bypass Rod
© Travis Industries
Stove Installation
(for qualified installers only)
100-01282_000
7
4111128