Setting Up The Computer; Setup Flow; Installing The Printer Driver - Konica Minolta bizhub C754 User Manual

3.8 Appendix: Printing in a Mac OS 9.2 environment
3.8.2

Setting up the computer

Setup flow

This section describes the setup flow for printing from your computer.
1
Preparing the printer driver
% Preparing the DVD-ROM
% Checking the operating systems supported by the printer driver
Check that your computer meets the operating environment requirements of the printer driver.
2
Installing the printer driver to the computer
% Installing the printer driver using the installer
Insert the DVD-ROM disk into the drive, and install the software by following the on-screen instructions.
% Adding the printer
Add the printer automatically detected by AppleTalk to the computer.
3
Preparation finished.
Checking the operating systems supported by the printer driver
The following lists the printer drivers included on the DVD-ROM supplied with this machine and the supported
operating systems.
Printer driver
PostScript PPD driver
(PS-PPD)

Installing the printer driver

Copy the printer description (PPD) file to the computer.
1
Insert the DVD-ROM into the DVD-ROM drive of the computer.
2
Open the folder in the DVD-ROM that contains the desired printer driver.
% Select the folder according to the printer driver, operating system, and language to be used.
3
Select the PPD file [KONICAMINOLTAC754UVxxx.ppd], and copy it to [Macintosh HD] (system hard
disk) - [System Folder] - [Extension] - [Printer Descriptions] on the computer.
This completes the installation process of the printer driver.
bizhub C754/C654
Page descrip- Supported Operating Systems
tion language
PostScript 3 Em- Mac OS 9.2 or later
ulation Mac OS X 10.2.8/10.3/10.4/10.5/10.6
3
3-91