Maintenance And Care; After Cleaning; Machine Storage - Bissell LITTLE GREEN 2067 Series Manual

Operations
Cleaning with the Tough Stain Tool
1. Attach the Tough Stain Tool to the handheld
cleaning hose.
2. Plug in the unit and press the power button beneath
the handle to turn it on.
3. Hold the tool 2.5 cm above soiled surface.
4. Press the spray trigger to mist solution over and
onto the soiled area.
5. Release the spray trigger and gently scrub the stain.
6. To lift the stain away, apply downward pressure
on the tool and slowly pull it toward you. Watch
as powerful suction removes the dirt and cleaning
solution. Continue until no more dirt can be removed.
7. As a final step, use "drying strokes" (by not pressing
the spray trigger) to remove as much moisture as
possible. Repeat this step as often as necessary.
Maintenance & Care

After Cleaning

1. Turn power switch to OFF position.
2. Unplug power cord from outlet.
3. Empty and rinse the dirty/collection tank after
each use, OR when dirty water reaches the
indicated maximum fill line. To remove the tank,
lift up the dirty/collection tank retainer lever and
remove the tank from the unit.
4. Disconnect the cleaning tool from the spray
trigger by pushing down on button lock and
pulling straight off (DO NOT twist tools to
remove them).
5. Once removed from the spray trigger, all
tools can be cleaned by rinsing under clean
running water.
6. Check spray nozzle for accumulated dirt or
debris. If necessary, clean with soft bristle brush.
7. To flush the tools and hose before storage,
suction up a bowl of clean water to ensure all
debris are removed.

Machine storage

1. Wipe all surfaces with a soft cloth.
2. Wrap power cord around the cord wrap on the back of the cleaner.
3. Wrap flex hose around the base of the unit and secure the spray trigger.
4. Store unit in protected, dry area, at room
temperature.
6
www.BISSELL.com
IMPORTANT
Check the manufacturer's tag before
cleaning upholstery. "W" or "WS" on the
tag means you can use your Little Green.
If tag is coded with an "S" (with diagonal
strike-through), or says "Dry Clean Only,"
do not proceed. If manufacturer's tag is
missing or not coded, check with your
furniture dealer.
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Retainer Lever
3.