Table of Contents
Advertisement
Save Toll
You can set your machine to send a fax at a later time when
you will not be present. Normally it is cheaper to send a fax at
night because telephone rates are lower than they are during
the day. Therefore you can use Save Toll to save money.
To use Save Toll, you first set the Save Toll time at what time
the fax to be sent.
Setting up Save Toll Time
1
Press Setup and select 'SYSTEM SETUP'
by pressing < or >.
2
Press Start/Enter.
3
Press < or > to select 'SAVE TOLL TIME'
4
Enter the time in 24−hour format.
•
For example, enter 2230 for 10:30 PM.
•
If you set a time earlier than the current time, the doc−
ument(s) will be sent at that time on the following day.
5
Press Start/Enter when the time appears correctly in
the display.
Activating Save Toll
Once you've set up Save Toll Time, you are ready to use Save
Toll. Your machine can hold only one Save Toll job at one
time, which can include many destinations in it.
1
Turn the document face down and feed it into the
loading slot.
2
Press Toll.
If 'SET SAVE TOLL TIME IN SYSTEM SETUP'
appears in the display, see "Setting up Save Toll Time"
on page 5−3.
3
Enter the number of the remote machine when you
are prompted by 'TEL:'.
You can use any Auto Dial key (such as One−Touch,
Group Dial, or two−digit Speed Dial location number),
or enter the number through the number keypad.
If you are using Group Dial, it should be primarily used.
Advanced Fax
5−3
Advertisement
Table of Contents
