Panasonic DMC-FT5EB Service Manual page 30

7.3.2. ALTIMETER
7.3.2.1. General description
7.3.2.2. Failure diagnosis of Altimeter.
The Altimeter sensor unit is IC6202 which is located on Main PCB.
(It detects direction of gravitation.)
Settings/Condition:
1. After performing the compass failure diagnosis, face down (the LCD side up) the camera unit, gradually.
Diagnosis:
1. When the compass in the camera unit points same direction before and after above condition, the built-in altimeter unit works
fine.
30