Using The Bypass Tray - Samsung SCX-5312F User Manual

3.6
P H
APER ANDLING

Using the Bypass Tray

The Bypass tray is located at the right side of your product. It
can be closed when you are not using it, making the product
more compact.
Use the bypass tray to print transparencies, labels, envelopes or
postcards in addition to making quick runs of paper types or
sizes that are not currently loaded in the paper cassette.
Acceptable print media are plain paper with sizes ranging from
3.9x5.8, to Legal 8.5 x 14 inch, the largest size acceptable, and
weighing between 16lb and 32lb.
The following table summarizes the print media allowed as well
as their stacking height limit.
Paper Type
Plain Paper
Envelope
Transparency
Label
Cardstock
a. The height is measured with the stack of sheets laid, without
being touched by hands, on a flat surface.
Notes:
• Always load only the print media specified in Specifications to
avoid paper jams and print quality problems.
• Do not hit the bypass tray or rest your hands on it; otherwise the
tray may be damaged or detached from the product.
• Remove any curl on postcards, envelopes, and labels before
loading them into the multi-sheet bypass feeder.
Stacking Height Limit
100 sheets or 9mm (max)
10 envelopes or 9mm (max)
30 sheets or 9mm (max)
30 sheets or 9mm (max)
10 sheets or 9mm (max)
a
a
a
a
a