Auto Tray Switch; Tray Priority Setting; Paper Substitution; Auto Continue - Samsung SCX-812x Series User Manual

Auto tray switch

This is the option to set if the machine is to continue printing or not when
any tray becomes empty. For example, both tray 1 and tray 2 are filled with
the same size paper, the machine automatically prints from tray 2 after the
tray 1 runs out of paper.
1. Press Machine Setup > Tray Settings > Settings > Auto Tray Switch.
2. Press On.
3. Press to save the selection.

Auto continue

This option allows you to continue printing when the paper size you have set
is mismatched with the paper in the tray. When this option is activated, the
machine continues printing using similar or large size paper. If this option is
inactivated, the machine waits until the required size paper is loaded in the
tray.
1. Press Machine Setup > Tray Settings > Settings > Auto Continue.
2. Press On.
3. Press to save the selection.

Paper substitution

When the requested paper for a print job is not available in the tray, this
feature allows you to substitute similar paper size, For example, if the
requested ledger sized paper is not available in the tray, this machine
substitutes A3 for the requested paper.
When the paper is substituted, some image loss may occur.
1. Press Machine Setup > Tray Settings > Settings > Paper
Substitution.
2. Press On.
3. Press to save the selection.

Tray priority setting

When you do not select the tray for printing, the tray selected as in the Tray
Priority Setting will be used in order. If the tray does not have the paper on
which you want to print, the machine automatically prints from the trays in
the priority order set.
1. Press Machine Setup > Tray Settings > Settings > Tray Priority
Setting.
2. Press a tray, and give priority in the order for printing job using UP and
Down.
3. Press to save the selection.
Media and tray_ 55