The [Reset] Button; Record Or Play From A Specified Measure - Yamaha PortaTone PSR-510 Owner's Manual

Record Functions

The [RESET] Button

RESET PLAY/STOP
STEP
BWD

Record Or Play from a Specified Measure

You can start SONG MEMORY recording or playback from any specified measure, as long as the specified
measure is within the range of measures that has already been recorded:
Z
Press the [MEASURE #] Button If Necessary ......................................................................................
X
Enter the Desired Measure Number .....................................................................................................
RESET
– +
0
C
Start Playback or Recording .................................................................................................................
Before Punch In/Out
After Punch In/Out
42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Press the SONG [RESET] button to go directly to the first measure of
the song and turn ON all tracks that contain data. Measure number "001"
STEP
FWD
will appear on the MULTI DISPLAY. The [RESET] button also functions
during playback or realtime recording.
If the measure number is not currently shown on the MULTI DISPLAY,
MEASURE #
press the [MEASURE #] button. If the measure number is already showing,
go directly to step X.
Use the [+] and [–] buttons, the number buttons, the data dial, or the
[MEASURE #] button itself to enter the desired measure number.
1 2
Start playback or recording. You can now start playback or recording
from the specified measure number.
NOTES
Example:
VOICE
A
1 2
Start Recording
(Punch In)
VOICE
A
1 2
Old Data
(Same as Before)
NOTES
• This function allows you to "punch-in" and "punch-out" at any measure
to re-record a section of a previously-recorded track.
VOICE
3 4 5 6 7
Stop Recording
(Punch Out)
VOICE VOICE
C
3 4 5 6 7
New Data
(Same as Before)
• Recording is carried out in 1-measure units, so if you punch out in the
middle of measure rests will be recorded for the remainder of that
measure.
• Voice, volume, pan, pitch
B
bend, tempo, harmony on/off,
8 9 DSP depth, effect on/off, dual
on/off, and revoice data
changes made during the
punch-in remain in effect
even after the punch-out
B
point, until further parameter
8 9
changes are encountered in
Old Data the old data.