System Reset - Yamaha Tyros5 Reference Manual

SYSTEM RESET

In this display, you can execute one of two reset methods: Factory Reset and Custom Reset. Factory Reset lets you call
up the default initial settings for each item while Custom Reset lets you call up your original settings with a single
touch.
Factory Reset
(see below)
Factory Reset—Restoring the Factory Programmed Settings
This function lets you restore the status of the instrument to the original factory settings.
1
Use the [1 ]–[3 ] buttons to select the desired item, then press the [4 ] but-
tons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
2
Press the [D] (FACTORY RESET EXECUTE) button to execute the Factory Reset opera-
tion for all checkmarked items.
Resets the System Setup parameters to the original factory settings. Refer to the Data List
(Parameter Chart) for details about which parameters belong to System Setup.
Resets the MIDI settings including the MIDI Setups on the USER tab display to the original
factory status.
Resets the current Effect settings and the following data:
• User Effect Types...............................................................................................
• User Master EQ Types.......................................................................................
• User Compressor Types ....................................................................................
• User Vocal Harmony Types ..............................................................................
• User Microphone Settings .................................................................................
Resets the Music Finder data (all Records) to the original factory settings.
Deletes all files and folders including the Expansion folder stored in the HD1 tab display.
Turns off all the Registration Memory [1]–[8] lamps, indicating that no Registration Mem-
ory Bank is selected although all the Registration Memory Bank files are maintained. In this
status, you can create Registration Memory setups from the current panel settings.
NOTE
The same operation can be done by turning the power on while holding the highest key. In this case, you can create
Registration Memory setups from the default panel settings.
Custom Reset
(Backup/Restore;
see page 132)
page 120
page 123
page 123
page 106
page 101
Tyros5 Reference Manual
10
131