D-Link xStack DES-3528 Series Cli Reference Manual page 60

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
show config
Parameters
Restrictions
Example usage:
To view the current configuration settings:
1. Basic (serial port, Telnet and web
management status)
2. storm control
3. loop detect
4. SIM
5. syslog
6. QoS
7. port mirroring
8. traffic segmentation
9. SSL
10. port
11. SFLOW
12. OAM
13. port lock
14. SNMPv3
15. management (SNMP traps RMON)
16. vlan
17. Q-in-Q
18. RSPAN
19. 802.1x
20. ACL
21. POE
22. FDB (forwarding data base)
23. address binding
24. net bios
25. dhcp server screening
26. sRED
27. ARP spoofing prevention
effective - Show only commands which affects the behavior of the device. For example, if
STP is disabled, then for STP configuration, only "STP is disabled" is displayed. All other
lower level setting regarding STP is not displayed. The lower level setting will only be
displayed when the higher level setting is enabled.
Note: This parameter is only for the current configuration.
modified - Show only the commands which are not from the 'reset' default setting.
Note:This parameter is only for the current configuration.
current_config - Specifies the current configuration.
unit - (Optional) Specifies which unit on the stacking system. If it is not specified, it refers to
the master unit.
<unitid 1-2> - Enter the unit ID here. This value must be between 1 and 2.
config_id - (Optional) Specifies the configuration file ID.
<filter_string 80> - (Optional) A filter string is enclosed by symbol ". Thus, the filter string
itself cannot contain the "character. The filter string is case sensitive. This value can be up to
80 characters long.
include - Includes lines that contain the specified filter string.
exclude - Excludes lines that contain the specified filter string
begin - The first line that contains the specified filter string will be the first line of the output.
Only Administrator-level users can issue this command.
28. PPPoE
29. MAC address table notification
30. STP
31. BPDU protection
32. safeguard
33. SSH
34. SNTP
35. LACP
36. IP
37. WAC
38. CFM
39. JWAC
40. LLDP
41. IGMP snooping
42. MBA
43. MLD vlan
44. multicast
45. multicast authentication
46. igmp snooping
47. mld snooping
48. access authentication control
(TACACS etc.)
49. ARP
50. route
51. dns relay
52. dhcp server
53. dhcp relay
60