D-Link xStack DES-3528 Series Cli Reference Manual page 394

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
Success.
DES-3528:admin#
config wac default_redirpath
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the WAC default redirect path:
DES-3528:admin# config wac default_redirpath http://2.3.2.3
Command: config wac default_redirpath http://2.3.2.3
Success.
DES-3528:admin#
config wac method
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the WAC authentication method:
DES-3528:admin# config wac method radius
Command: config wac method radius
Success.
DES-3528:admin#
config wac ports
Purpose
Syntax
Description
Parameters
Used to config wac default redirect path.
config wac default_redirpath <string 128>
If the default redirect path is configured, the user will be redirected to the default redirect path
after successful authentication.
When the string is cleared, the client will be redirected to logout page after successful
authentication.
<string 128> – The URL that the client will be redirected to after successful authentication.
The redirected path is cleared by default.
Only Administrator and Operator and Power-User-level users can issue this command.
To configure the WAC method.
config wac method [local | radius]
This command configures the WAC method.
method – Specifies the authentication method.
local – The authentication will be done via the local database.
radius – The authentication will be done via the RADIUS server.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to configure WAC port level settings on the Switch.
config wac ports [<portlist> | all] {state [enable | disable ] | aging_time [infinite | <min
1-1440>] | idle_time [infinite | <min 1-1440>] | block_time [<sec 0-300>]}(1)
This command is used to configure WAC port level settings on the Switch.
state – Specifies to enable/disable WAC state.
aging_time – A time period during which an authenticated host will be kept in authenticated
state. "infinite" indicates the authenticated host on the port will not age-out. The default
value is 24 hours.
394