D-Link xStack DES-3528 Series Cli Reference Manual page 222

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
Command
show auth_session_statistics
show auth_client
show acct_client
config accounting service
show accounting service
Each command is listed, in detail, in the following sections:
enable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1X on the Switch globally:
DES-3528:admin# enable 802.1x
Command: enable 802.1x
Success.
DES-3528:admin#
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1X on the Switch:
DES-3528:admin# disable 802.1x
Command: disable 802.1x
Success.
DES-3528:admin#
create 802.1x user
Purpose
Syntax
Description
Parameters
Parameters
{ports <portlist>}
[network | shell | system] state [enable | disable]
Used to enable the 802.1X server on the Switch.
enable 802.1x
This command enables the 802.1X Network Access control server application on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the 802.1X server on the Switch.
disable 802.1x
This command is used to disable the 802.1X Network Access control server application on
the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to create 802.1X user.
create 802.1x user <username 15>
This command creates an 802.1X user.
<username 15> − Specifies adding user name
222