D-Link xStack DES-3528 Series Cli Reference Manual page 489

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
DES-3528:admin#show ipv6 neighbor_cache ipif System all hardware
Command: show ipv6 neighbor_cache ipif System all hardware
Neighbor
--------------------------------------
2001::3001
FE80::250:BAFF:FE1A:FF55
Total Entries: 2
State:
(I) means Incomplete state.
(S) means Stale state.
(P) means Probe state.
DES-3528:admin#
config ipv6 nd ns ipif retrans_time
Purpose This command is used to configure the IPv6 ND neighbor solicitation retransmit time.
Syntax config ipv6 nd ns ipif <ipif_name 12> retrans_time <millisecond 0-4294967295>
Description Configure the IPv6 ND neighbor solicitation retransmit time, which is between
retransmissions of neighbor solicitation messages to a neighbor when resolving the address
or when probing the reachability of a neighbor.
Parameters ipif - The IPv6 interface name
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
retrans_time - Neighbor solicitation's re-transmit timer in millisecond. It's have the same value
as RA retrans_time in the config IPv6 ND RA command. If we configure one, the other will
change too.
<millisecond 0-4294967295> - Enter the re-transmit timer value here. This value must be
between 0 and 4294967295 milliseconds.
Restrictions Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure the retrans_time of IPv6 ND neighbor solicitation:
DES-3528:admin#
Command: config ipv6 nd ns ipif System retrans_time 1000000
Success.
DES-3528:admin#
show ipv6 nd
Purpose
Used to display information regarding neighbor detection on the Switch.
Syntax show ipv6 nd {ipif <ipif_name 12>}
Description Used to display information regarding neighbor detection on the Switch.
Parameters ipif – (Optional) The name of the interface.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
If no IP interface is specified, it will show the IPv6 ND related configuration of all interfaces.
Restrictions None.
Example usage:
To show IPv6 ND related configuration:
(R) means Reachable state.
(D) means Delay state.
(T) means Static state.
config ipv6 nd ns ipif System retrans_time 1000000
Link Layer Address
------------------
00-50-BA-1A-FF-55
00-50-BA-1A-FF-55
489
Interface State
------------ -----
System R
System R