Entering Bios Setup; Main Menu; Table 19: Bios Setup, Main Menu Options - Intel SE7520JR2 Technical Manual

Intel® Server Board SE7520JR2
Key Option
↔
Select Menu
Tab Select Field
- Change Value
+ Change Value
F9 Setup Defaults
F7 Discard Changes
F10 Save Changes and
Exit
4.4.2

Entering BIOS Setup

The BIOS Setup utility is accessed by pressing the <F2> hotkey during POST
4.4.2.1

Main Menu

The first screen displayed when entering the BIOS Setup Utility is the Main Menu selection
screen. This screen displays the major menu selections available. The following tables describe
the available options on the top level and lower level menus. Default values are shown in bold
text.
Feature
Revision 1.0
The left and right arrow keys are used to move between the major menu pages. The
keys have no affect if a sub-menu or pick list is displayed.
The Tab key is used to move between fields. For example, Tab can be used to move
from hours to minutes in the time item in the main menu.
The minus key on the keypad is used to change the value of the current item to the
previous value. This key scrolls through the values in the associated pick list without
displaying the full list.
The plus key on the keypad is used to change the value of the current menu item to the
next value. This key scrolls through the values in the associated pick list without
displaying the full list. On 106-key Japanese keyboards, the plus key has a different
scan code than the plus key on the other keyboard, but will have the same effect.
Pressing F9 causes the following to appear:
If "OK" is selected and the Enter key is pressed, all setup fields are set to their default
values. If "Cancel" is selected and the Enter key is pressed, or if the ESC key is
pressed, the user is returned to where they were before F9 was pressed without
affecting any existing field values.
Pressing F7 causes the following message to appear:
If "OK" is selected and the Enter key is pressed, all changes are not saved and setup is
exited. If "Cancel" is selected and the Enter key is pressed, or the ESC key is pressed,
the user is returned to where they were before F7 was pressed without affecting any
existing values.
Pressing F10 causes the following message to appear:
Save configuration changes and exit setup?
If "OK" is selected and the Enter key is pressed, all changes are saved and setup is
exited. If "Cancel" is selected and the Enter key is pressed, or the ESC key is pressed,
the user is returned to where they were before F10 was pressed without affecting any
existing values.

Table 19: BIOS Setup, Main Menu Options

Options
C78844-002
Description
Load Setup Defaults?
[OK] [Cancel]
Discard Changes?
[OK] [Cancel]
[OK] [Cancel]
Help Text
System BIOS
Description
85