Intel® Server Boards S5000PSL and S5000XSL TPS
3.1.3.3.1
Minimum Non-Mirrored Mode Configuration
The server board is capable of supporting a minimum of one DIMM installed. However, for
system performance reasons, Intel's recommendation is that at least 2 DIMMs be installed.
The following diagram shows the recommended minimum DIMM memory configuration.
Populated DIMM slots are shown in Grey.
Branch 0
Note: The server board supports single DIMM mode operation. Intel will only validate and
support this configuration with a single 512 MB x8 FBDIMM installed in DIMM socket A1.
Revision 1.2
Branch 1
Figure 13. Minimum Two DIMM Memory Configuration
Intel order number: D41763-003
Design and Environmental Specifications
Channel B
Channel A
Channel C
Channel D
TP02300
37