Menu Operation; Menu System; Activating Security Code - Kenwood KDC-MP338 Instruction Manual

Menu Operation

Menu System

Set up the following functions;
Display Setting Setting overview
"SECURITY Refer to Sets/Resets security code
SET"/ page 12
"SECURITY
CLR"
"CLOCK Refer to Sets the clock.
ADJUST" page 13
"DISPLAY" ON*/OFF Turns off the display when no
operation is performed.
"DIMMER" AUTO*/OFF Dims the display in conjunction
1,2,3
* with the light switch of the
vehicle.
4
"DIMMER"* ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
"DOT LINE" ON*/OFF Specifies whether to display the
red dotted line on the display.
3,4
"SWPRE"* REAR*/ Sets the preout output.
SUB-W
1,2
"AMP"* ON*/OFF Turns on/off the built-in amplifier.
"AMS Refer to Controls the connected LX
1
CONTROL"* page 13 amplifier.
"ZONE2"* 1,2,3 REAR*/ Specifies the destination of AUX
FRONT input sound when the Dual Zone
function is turned on.
"SUPREME" ON*/OFF Turns ON/OFF the Supreme
function.
"CRSC" OFF/ON* Switches to Monaural to decrease
noise when reception is poor.
"NAME SET" Refer to Sets the display when switched
page 14 to AUX source.
"SCROLL" AUTO*/ Specifies whether the text is
MANUAL scrolled automatically.
"RECEIVE Refer to Sets the receive mode of HR radio.
MODE" page 14
"ESN" — Displays the Electronic Serial
Number of satellite radio.
"AUX" OFF/ON1*/ Sets whether to display AUX
ON2 during source selection.
"CD READ" 1*/2 Sets the CD read mode.
"DEMO Refer to Specifies whether to enable
MODE" page 14 demonstration.
*Factory setting
*1 Function of KDC-X492.
*2 Function of KDC-MP438U.
*3 Function of KDC-MP408U.
*4 Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
12
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
Source
(excluding iPod).
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1
Enter Menu mode
—
Press the [M.JOG] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards up or down.
—
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
—
• "ZONE2" is displayed when "2ZONE" in <Audio Setup>
(page 7) is set to "ON.
• Refer to the <Appendix> (page 16) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.

Activating Security Code

—
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Security Code item during Menu mode
Select the "SECURITY SET" display.
For how to select menu items, refer to <Menu
System>(page 12).
—
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
3
Select the digits to enter
Push the Control knob towards right or left.
4
Select the Security Code numbers
Push the Control knob towards up or down.