Auto Configuration With Fail Safe Settings; Save Settings And Exit; Exit Without Saving - Xycom SBC-370 Board Processor Manual

AUTO CONFIGURATION WITH FAIL SAFE SETTINGS

This option allows you to load the Fail Safe default settings when your computer
cannot boot normally. These settings are not optimal, but are the most stable.

SAVE SETTINGS AND EXIT

Select this option when you finish setting all the parameters and want to save
them into the CMOS. Simply press the Enter key and all the configuration changes
will be saved.

EXIT WITHOUT SAVING

Select this option if you want to exit the Setup without saving the changes that you
made. Simply press the Enter key and you will exit the BIOS SETUP without saving the
changes.
39 AMI BIOS Setup Menus