Table of Contents
Advertisement
Specify the mode of serial port 2.
Serial Port B Mode >:
Specify the mode of IR device that is connected to the IR port.
IR Duplex Mode >:
Specify the function mode if an IrDA mode is selected.
IrDA Protocol >:
Specify the I/O port address of the parallel port.
Onboard Parallel Port >:
Used to specify the mode of parallel port. The options are:
Parallel Port Mode >:
(normal parallel port mode)
• Normal
(supports bidirectional transfer)
• Bi-Dir
(supports devices that comply with the Enhanced Parallel Port specification)
• EPP
(supports devices that comply with the Extended Capabilities Port)
• ECP
This option is used to assign certain IRQ to the parallel port. The opti-
Parallel Port IRQ >:
mal and fail-safe setting is 7.
This function is available only if the parallel port mode is ECP.
Parallel Port DMA Channel >:
The optimal and fail-safe setting is 3.
Define which onboard IDE controller channel(s) should be used. Avail-
Onboard IDE >:
able options are:
,
,
, and
.
Primary
Secondary
Both
Disabled
35
AMI BIOS Setup Menus
Advertisement
Table of Contents
