Table of Contents
Advertisement
6.2.4.1
For setting 802.1Q VLAN click the 802.1Q Tagt-Based VLAN. The screem will prompt as
following.
VID: (Virtual LAN ID) It is an definite number of ID which number is from 1 to 4094.
PVID: (Port VID) It is an untagged member from 1 to 4094 of default VLAN.
Link Type:
Access means the port can receive or send untagged packets.
Trunk means that the prot can receive or send tagged packets.
The Router initially default configures one VLAN , VID=1.
A port such as LAN1 to LAN4 and WAN1 to WAN8 can have only one PVID, but can have as many
VID as the router has memory in its VLAN table to store them.
Ports in the same VLAN group share the same frame broadcast domin thus increase network
performance through reduced boardcast traffic. VLAN groups can be modified at any time by
adding, moving or changing ports without any re-cabling.
6.2.4.2
Port-Based VLANs are VLANs where the packet forwarding decision is based on the destination
MAC address and its associated port.
802.1Q Tag-Based VLAN
Port-Based VLAN
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
56
Advertisement
Table of Contents
