Purpose; Applicable Documents And Revisions; Reference Documents - Intel IXDP465 Quick Start Manual

1.0

Purpose

This document, the Intel
instructions for unpacking, inspecting, setting up, and starting the Intel
Platform.
Before the IXDP465 development platform is powered up for the first time, it is very important to
first become familiar with the platform. Therefore,
required information for powering up the platform for first time use. These sections provide the
following information:
•
Photo of the IXDP465 development platform setup for Quick Start operation, showing the
location of factory-installed mezzanine modules and location of key interfaces to assist with
connection of console, Ethernet, and power cables.
•
Factory default settings of all switches and jumpers, allowing the user to ensure they were not
accidentally changed during transport, or repositioned by a previous platform user.
•
Location and definitions of the LCD display and all the platform LEDs, so that they can be
visually monitored for proper power-up and booting.
Instructions for preparing and starting the IXDP465 development platform begin in
Note: It is highly recommended that a printout of this entire Quick Start Guide is obtained prior to
preparing and powering up the platform for the first time. All tables in this Quick Start Guide
include checkboxes so that items in the printout can be checked off to insure that all platform
switches, jumpers, and LEDs operate in their default state, which will ensure a successful first-time
bootup of the platform.
Use the Zoom feature in Adobe* Reader* to optimize viewing of the figure details contained in this
document, for example, the switch and jumper locations on the IXDP465 development platform.
Note: If any deviations from the factory default settings of this Quick Start Guide are planned, or for
more detailed information about this platform, including design definition of all boards, mezzanine
cards, platform components, optional modules, optional switch and jumper settings, and overall
development capabilities, please see the Intel
2.0

Applicable Documents and Revisions

The documents referenced below may be obtained online unless noted otherwise.
Table 1. Reference Documents (Sheet 1 of 2)
®
Intel IXDP465 Development Platform User's Guide
®
Intel IXDP465 Development Platform Specification Update
®
Intel IXDP465 Development Platform Documentation Kit
† This document is available at:
http://www.intel.com/design/network/products/npfamily/docs/ixp4xx.htm
†† This document is available at:
AN
Quick Start Guide—Intel
®
IXDP465 Development Platform Quick Start Guide, contains
Title
http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm
®
Intel IXDP465 Development Platform
Order Number: 305825, Revision: 002
®
IXDP465 Development Platform
Section 5.0 through
®
IXDP465 Development Platform User's Guide.
Document
Number
306462
306509
N/A
®
IXDP465 Development
Section 8.0 provide the
Section 9.0.
Location
†
Documentation Web Page
Intel Representative
†
Documentation Web Page
May 2005
5