Desktop Board Features; Feature Summary - Intel D845PESV Product Manual

1 Desktop Board Features

Table 1 describes the major features of Intel
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
I/O Control
Audio
LAN (optional)
®
Desktop Board D845PESV.
ATX at 12.0 inches by 8.2 inches
Support for:
533/400 MHz front side bus (FSB) Intel
mPGA-478 socket
®
400 MHz FSB Intel Celeron
Up to two 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory
Modules (DIMMs) with gold-plated contacts. Supported memory
configuration are:
— DDR333: to run DDR333 memory at full speed requires an Intel
Pentium 4 processor with 533 MHz front side bus frequency (FSB)
— DDR333 memory will run only at DDR266 speeds when using a
processor with 400 MHz FSB
— DDR266: requires an Intel Pentium 4 processor with
533/400 MHz FSB, or Intel Celeron processor with 400 MHz FSB
— DDR200: requires an Intel Pentium 4 or Intel Celeron processor with
400 MHz FSB
Unbuffered and non-registered single or double-sided DIMMs
Serial Presence Detect (SPD) memory only
Non-ECC RAM (ECC memory will run in non-ECC mode)
2.5 V memory
Desktop Board D845PESV has been designed to support DIMMs based on
NOTE:
512 Mbit technology up to 2 GB, but this technology has not been validated on this Intel
desktop board. For more information about the latest list of tested memory, refer to the
Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop/
®
Intel 845PE chipset consisting of:
®
Intel 82845PE Memory Controller Hub (MCH) with Accelerated Hub
Architecture (AHA) bus
®
Intel 82801DB I/O Controller Hub (ICH4) with support for up to six
Hi-Speed Universal Serial Bus 2.0 (USB 2.0) ports
4 Mbit Firmware Hub (FWH)
Support for:
SMSC LPC47M172
National Semiconductor PC87372
Intel 845PE chipset (AC '97)
Analog Devices Inc. audio codec
®
Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and
RJ-45 connector
® ®
Pentium 4 processor in an
®
processor in an mPGA-478 socket
®
continued
7