Table of Contents
Advertisement
Intel Desktop Board D845PESV Product Guide
Boot Device Priority Submenu
Maintenance
The submenu represented in Table 27 is for setting boot devices priority.
Table 27.
Boot Device Priority Submenu
Options
Feature
st
1
Boot Device
nd
2
Boot Device
rd
3
Boot Device
Hard Disk Drives Submenu
Maintenance
The submenu shown in Table 28 is for setting hard disk drives.
Table 28.
Hard Disk Drives Submenu
Feature
st
1
Hard Disk Drive
(Note)
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.
62
Main
Advanced
Description
Removable Device
Specifies the boot sequence from the available devices. To specify
boot sequence:
Hard Drive
1.
Select the boot device with < > or < >.
ATAPI CD-ROM
2.
Press <Enter> to set the selection as the intended boot device.
Disabled
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
Removable Device (maximum of four).
Hard Drive (maximum of 12).
ATAPI CD-ROM (maximum of four).
Main
Advanced
Options
Dependent on installed
hard drives
Security
Power
Security
Power
Description
Specifies the boot sequence from the available hard disk
drives. To specify boot sequence:
1.
Select the boot device with < > or < >.
2.
Press <Enter> to set the selection as the intended
boot device.
Boot
Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Boot
Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Advertisement
Table of Contents
