Table 17.
Primary/Secondary IDE Master/Slave Submenus (continued)
Feature
Options
DMA Mode
(Note)
Cable Detected
None
Note: These configuration options appear only if an IDE device is installed.
Description
Auto (default)
Specifies the Ultra DMA mode for the drive.
SWDMA 0
SWDMA 1
SWDMA 2
MWDMA 0
MWDMA 1
MWDMA 2
UDMA 0
UDMA 1
UDMA 2
UDMA 3
UDMA 4
UDMA 5
Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
Using the BIOS Setup Program
53